I can feel the excitement.


Exactly what I hoped I could do with my hard-drive-platter motor that I am designing, max torque while being able to max the rotor tensile strength, RPM. (Wherever that is ) I have been working on it in CAD as far as I can take it until what I have done leaves behind what I understand. Once I can demonstrate it working though you can expect to see the CAD, pics and specs posted on the site.

You seem to resonate with him, you have a lot more put together and goals like his, more-so than anyone I have found so far.

Can't wait to learn more,
matt

No UFO sir it isn't you it's me. You have been more than pleasant and congenial, but some of the statements you have made leaves me wondering if this is the technology I am seeking. Some of the things you have given for reasons to not use hybrid hot cold systems seem very trivial to me and easily remedied. Easier to remedy than trying to implement everything cold. If I were to build and implement a cold motor generator I would not be able to use it till I started to change the motors in each appliance then if I tried to use that appliance I wouldn't be able to use anything else till they were all changed to cold or run another set of wiring in my home to use till all appliances were converted. I see changing all motors in all appliances as more like impossible than mega work. If I built your motor to power an off the shelf generator, I would be able to use all my appliances right away.
In my simple mind I see implementing a free energy technology then make improvements on it as you go (do the best you can with what you got then make it better) and as you find out what the real problems are. If it gets stressed, redesign it.
Yes I need to learn your system, but I don't need to reinvent the wheel you and Tesla and others have already done. So I will see your system to see if it will work for my visions then I will prototype and engineer scaled devices to meet the needs as I see them. I understood that you are offering this technology for others to use as needed. I will help get it out to the world, but on my own path. I know at least in this country only 1 in 100,000 or less people would have the skills or the tools or the ambition to build what we have build so far and I think we have done the easy part.
No... you being anonymous doesn't bother me at all. It does however seem not very friendly referring to someone as UFO or UFOPilitics, but I respect your wish to remain anonymous. As for me I am too old to be worried about people knowing who I am. Besides, that info is too easy to obtain anyway.
Thanks I have never felt like I couldn't pipe in whenever I wanted to... I have however wondered if it were wise for me to post my thoughts.
I won't be far away so keep up the good work and educate many to build an army of solders for this good and noble cause (you did say it was a war didn't you).

Best wishes
Larry

Hey Larry,

All I will be doing here in the next weeks-months is just laying out the "Foundations" for others like you to do whatever it pleases your desires!!

When you were mentioning about cold running hot, I never said it could not or should not be done...but telling you there are just better ways to do it...that is all!...And the reason is just because I tried those alternatives, and then other ones that resulted much better...

Everybody reacts different to any given statement...I could say..."sorry, but I've tried that and it does not work..."
and there would be ones who just will not attempt to try...or others who will try, just to prove themselves, or maybe just to think they could make it work...now those guys I like...the ones who do not believe me at all...those are the ones who can make things happen, who could change things around them!

It would be very silly on my side to be fully disclosing something here to the world and "demanding" all of them to be done only "one way", my way...?...for God sake Larry??!!

You could build one of my motors (and I know you will) and then try to run a Generator Head off the shelf...by all means do whatever you please!

Ok Larry?

Regards and I hope you understood my point.

Related to Ufopolitics...it is just another Anonymous Name like Ewizard, Torpex, Codeboundfuture, Indianaboys, Netica, Thugugly, Farmhand, DadHav,VidBid..etc,etc...Now, the real names like yours here are just a very small group Larry, very reduced number...So maybe could be the fact you may not like Unidentified Flying Objects or UFO's??...

Cheers Larry!!

Ifopolitics*

*Identified Flying Object (IFO)

Thanks Indianaboys!

That was an excellent video from Mr Lindemann!!, very well displayed!
Now, to make that Dynamometer I just need the scales, and I will make the wheel in my Lathe...no problem.
Any particular store in the US that could carry those scales?

There is also another way to make a Dynamometer with an Alternator from a car...have you tried that one?


Thanks again


Ufopolitics

UfoPolitics,

No I have not seen how to make a Dynamometer with an Alternator, do you have the plans on how to do that? Please post them if you do.

Here is a company that provides those kinds of scales. I believe you could go digital and make it a little more accurate.

Hanging Scales, Spring Scales, Sports Scales

Jennings / JScale UltraSport V2-30 Digital Utility and Fish Scale
With a built in tape measure and temperature mode!
30 kilogram capacity x 0.01 kilogram resolution
The Jennings UltraSport V2-30 Digital Hanging Fish Scale

Thanks for your persistence,

IndianaBoys

Thanks Indianaboys!

I will check them out.
No, I do not have the Alternator diagrams, but I have seen them, I will also look for them. Below is a video of a guy using one with his motor...

motorv3alternator1.wmv - YouTube

Without my "persistence" I would have never, ever reached all my goals, my friend!

Regards

Ufopolitics

Hi guys,

Can you give me your thoughts about this one? I just bought this product ( http://theteslasecret01.yolasite.com ) for $27 and wanted your opinion on this matter. Thanks

Tesla secret is a tuff site to get off. To get rid of pop up and get out, hold down Alt key and hit F4 key. First time will get out out of the pop up, second time should get you off the site.
The Alt + F4 approach is the best way I know of to get out of pop-ups without getting their cookies and whatever else.
-No disrespect to you, sha5mdmakesure. Good luck with your quest.
Bob